Download NetApp Certified Implementation Engineer - SAN Specialist.NS0-509.ExamTopics.2025-11-06.24q.vcex
| Vendor: | Network Appliance |
| Exam Code: | NS0-509 |
| Exam Name: | NetApp Certified Implementation Engineer - SAN Specialist |
| Date: | Nov 06, 2025 |
| File Size: | 1 MB |
How to open VCEX files?
Files with VCEX extension can be opened by ProfExam Simulator.
Discount: 20%
Demo Questions
Question 1
Click the Exhibit button.
Referring to the exhibit, which two pairs of ports are currently configurable as FC SAN LIFs? (Choose two.)
- 01b, 0h
- 01a, 0g
- 01a, 0h
- 01b, 0g
Correct answer: D
Explanation:
A: 1 - Mosted A: 1 - Mosted
Question 2
A customer has an existing 8-node cluster that consists of six FAS2650 nodes and two FAS2554 nodes. The customer wants to expand the cluster by adding two AFF A220 nodes.
Which resource would be used to determine whether this configuration is supported?
- Interoperability Matrix Tool (IMT)
- Config Advisor
- OneCollect
- Hardware Universe (HWU)
Correct answer: B
Explanation:
D: 1 - Mosted D: 1 - Mosted
Question 3
Click the Exhibit button.
A customer has an AFF A700 connected to a Cisco switch and has verified connectivity but cannot see any LUNs. The customer issued the run -node scaling-01 -command fcp topology show command to verify the connection.
Referring to the exhibit, what needs to be enabled on the Cisco switch?
- Trunking needs to be enabled.
- VSAN needs to be enabled.
- NPIV needs to be enabled.
- VFC needs to be enabled.
Correct answer: D
Question 4
Click the Exhibit button.
A customer is using both FC and NVMe in a cluster. The customer needs to do some work on AFF_1.
Referring to the exhibit, what will happen?
- The NVMe namespaces on AFF_2 will be available after takeover of AFF_1.
- The FC LUNs that use cluster interconnect to access the LUNs on AFF_1 will be unavailable after failover.
- The FC LUNs on node AFF_2 will be unavailable after failover of AFF_1.
- The NVMe namespaces on AFF_1 will be unavailable after takeover by AFF_2.
Correct answer: C
Explanation:
D: 2 - Mosted D: 2 - Mosted
Question 5
A customer that is using an AFF A220 has a problem with a host for a new FC LUN. Other LUNs on the same SVM are working properly. This LUN is not visible on the host.
Which configuration does the customer need to verify in their solution?
- LUN mapping with igroup
- host HBA speed settings
- FC target port setting on NetApp node
- FC switch zoning
Correct answer: C
Explanation:
A: 1 - Mosted A: 1 - Mosted
Question 6
You deployed a new SVM for FC access, and you used the vserver fcr, create -vserver svm1 - status-admin up command to enable FC service on the SVM. You then created the LIFs for the FC protocol. When you review the status of the LIFs, they show that the admin status is up, but the operational status is down. You have already verified that the ports are physically connected.
In this scenario, what is the next step to bring the LIFs up?
- Use the network interface modify command to change the operational status of the LIFs.
- Create at least one zone that contains your SVM LIF WWPNs and an initiator.
- Verify that an FC license is applied on your system.
- Disable the SAN switch port where your NetApp storage is connected.
Correct answer: B
Question 7
Click the Exhibit button.
Referring to the exhibit, which two elements are required for NVMe host access with ONTAP 9.5 and using supported AFF nodes? (Choose two.)
- You need 16 Gb FC HBAs installed in the AFF nodes.
- You must have the license installed for NVMe support in the cluster.
- You must have the license installed for FC support in the cluster.
- You need 32 Gb FC HBAs installed in the AFF nodes.
Correct answer: CD
Explanation:
AC: 1BD: 1 - Mosted AC: 1BD: 1 - Mosted
Question 8
You use iSCSI to present a LUN to a newly installed Windows 2016 Server. You have created the volume and LUN on the NetApp cluster. When you perform a hardware rescan on the Windows host, you cannot see the newly presented storage.
What are three reasons for this problem? (Choose three.)
- The protocol has not been enabled on the NetApp cluster.
- You need to add the IQN of the Windows host to the newly created LUN.
- The IQN of the Windows host is not included in the igroup for the new LUN.
- The wrong igroup has been associated with the new LUN.
- The volume has not been enabled for iSCSI access.
Correct answer: ABD
Question 9
An administrator is configuring their Ethernet switches to support an AFF A300 cluster that will be providing iSCSI LUNs to servers. The switches are also used for other traffic from various hosts.
In this scenario, which statement about the switch configuration is correct?
- Use a larger MTU size at the SAN connection rather than the host connections to allow for greater SAN bandwidth.
- Use network ports as access ports only.
- Use multiple VLANs to segregate iSCSI traffic from other traffic types
- Use a single VLAN to consolidate all data traffic on the switches.
Correct answer: A
Explanation:
C: 1 - Mosted C: 1 - Mosted
Question 10
You have three Windows servers and one Linux server, each with dual-ported HBAs that are connected into a dual fabric.
In this scenario, what is the minimum number of zones that you need to create within each fabric switch?
- 8
- 1
- 4
- 2
Correct answer: A
Explanation:
C: 1 - Mosted C: 1 - Mosted
Question 11
While expanding a 200 GB LUN in an ONTAP 9.4 system, the following error is observed:
What is the cause of this error?
- The volume auto-grow is disabled.
- The LUN reached maximum capacity.
- The LUN can be expanded up to 10 times its original size.
- Space reservation is enabled.
Correct answer: A
HOW TO OPEN VCE FILES
Use VCE Exam Simulator to open VCE files
HOW TO OPEN VCEX AND EXAM FILES
Use ProfExam Simulator to open VCEX and EXAM files
ProfExam at a 20% markdown
You have the opportunity to purchase ProfExam at a 20% reduced price
Get Now!